WinLed Prefab - feed-through wiring

Good light gets the job done

  • Flexible application
  • High light output
  • Ideal for workplaces
  • High efficiency up to 175 lm/W
  • Dimmable
WinLed Prefab - feed-through wiring

Good light gets the job done

  • Flexible application
  • High light output
  • Ideal for workplaces
  • High efficiency up to 175 lm/W
  • Dimmable

Features

  • Pre-wired with through wiring possibility, ideal for series installation
  • Fast and neat installation without external cables
  • Prefab model, minimal installation time required
  • Reliable connection for continuous lighting system
  • Robust enclosure
  • Perfect for production areas and workplaces

Technical features

Suitable for wall mounting Yes
Suitable for suspended mounting Yes
Suitable for ceiling mounting Yes
Suitable for built-in mounting No
Suitable for surface mounting Yes
Suitable for light line configuration No
Suitable for workplace according to EN 12464-1 No
Lamp type LED not exchangeable
Housing material Aluminium
Surface protection housing Other
Housing colour Aluminium
Material cover Plastic, opal
Type of grid None
Voltage type AC/DC
Nominal voltage 220V - 240V
Nominal current 140mA - 140mA
Type of control gear LED operating device current-controlled
With control gear Yes
Light distributor Diffuser lens/optic/panel
Light distribution Symmetric
Colour consistency (McAdam ellipse) SDCM3
Energy efficiency class of the light source according to EU regulation 2019/2015 Not required
Rated lifetime L70/B50 at 25 °C 100000h
Lumen maintenance at median useful life of 50,000 h at 25 °C ambient (tq) 90%
Lumen maintenance at median useful life of 75,000 h at 25 °C ambient (tq) 85%
Failure rate at median useful life of 50,000 h at 25 °C ambient (tq) 5%
Failure rate at median useful life of 75,000 h at 25 °C ambient (tq) 10%
Max. number of luminaires per miniature circuit breaker B16 (MCB) 30
Max. number of luminaires per miniature circuit breaker C16 (MCB) 37
Impact strength IK08
Suitable for emergency lighting Yes
Glow-wire test according to IEC 60695-2-11 650 °C - 30 s
Colour rendering index CRI 80-89
Power factor 0.96
Width 55mm
Height/depth 39mm
Type of wiring Loop-through wiring included
Number of poles 3
Conductor cross section 2.5mm²
Connection type Push-in clamp
Unified Glare Ratio (UGR) 24
Nominal current 240mA - 240mA
Max. number of luminaires per miniature circuit breaker B16 (MCB) 56
Max. number of luminaires per miniature circuit breaker C16 (MCB) 70
Power factor 0.97
Nominal current 375mA - 375mA
Max. number of luminaires per miniature circuit breaker B16 (MCB) 26
Max. number of luminaires per miniature circuit breaker C16 (MCB) 32
Power factor 0.98
Nominal current 480mA - 480mA
Max. number of luminaires per miniature circuit breaker B16 (MCB) 13
Max. number of luminaires per miniature circuit breaker C16 (MCB) 16
Type of wiring Suitable for loop-through wiring
Length 1530mm
Colour temperature 4000K, 4000K
Beam angle Open beam/diffuse
Max. system power 37W - 107W
Luminaire efficacy 142lm/W - 153lm/W
Rated luminous flux according to IEC 62722-2- 1 4918lm - 15213lm

Images

Service parts

View our service parts for the WinLed Prefab - feed-through wiring (and earlier models) in the parts shop.

Parts shop

WinLed Prefab

The WinLed Prefab are high-quality surface-mounted luminaires for locations where a light line is not possible.

All Winterwarm L-Prefab types
contactblock

Do you have a question?

We are happy to help you! Our lighting specialists are at your service.

contactblock

Looking for flexible surface-mounted luminaires?

Our experts are happy to assist you, either remotely or on-site. This allows us to find the solution that best suits your situation. Request a quote now!